We build the power behind commercial sites, fast chargers and EPC projects.
Penta Electric is a licensed electrical contractor based in Meridian, Idaho. We develop and build DC fast-charging sites, take projects from design to energization as a full EPC contractor, and handle commercial electrical service from the utility transformer to the last panel.
Solar taken through PTO, at Penta and before
Master electrician licenses: ID, CO, UT, TX and MT
From design and procurement through energization, as a full EPC contractor
Family owned and based in Meridian, Idaho
Start where your project starts
Three lines of work under one licensed team. Pick the one that fits.
Commercial electrical
Service upgrades, switchgear, tenant improvements, ag and industrial power, mini data centers and server rooms.
Commercial workDC fast-charging sites
Site selection, utility capacity, grants, design, construction and commissioning for fast-charging plazas.
How we develop sitesEngineering, procurement and construction
One contract for design, equipment and construction on commercial power and charging projects, through energization.
EPC servicesWe care about the details.
Electrical work lasts decades. We build it to be inspected, maintained and expanded long after we leave the site.
Clean, deliberate installs
Straight conduit runs, dressed conductors, torqued terminations and labels on every panel, disconnect and conduit.
Built to code, ready for inspection
Every job runs under a licensed master electrician and is built to pass inspection, not fixed after it.
Documented handoff
As-builts, photos, panel schedules and test results, so owners know exactly what they have.
Clear communication
One point of contact, honest schedules and no surprises from utility coordination to energization.
Recent projects
Commercial electrical, done right and guaranteed to pass inspection
We work for owners, general contractors and developers across Idaho, the Mountain West and nationwide.
Service upgrades and switchgear
New services, 3-phase upgrades, ATS and distribution, and utility coordination.
Tenant improvements and remodels
Lighting, power and low-voltage rough-in for retail, office and hospitality.
Farms, packing and processing
Pump, pivot and shop power, plus motor controls and large loads.
Mini data centers and server rooms
Power distribution, dedicated circuits, UPS and backup power for modular data centers, server rooms and equipment that can't go down.
Prevailing wage projects
Certified payroll and subcontract compliance for public and grant-funded jobs.
Batteries and backup
Commercial battery storage and generator tie-ins.
From an empty parking lot to an energized fast-charging plaza
Penta develops DC fast-charging sites with property owners and capital partners, then builds them as the licensed electrical contractor. One team carries the project from site control to commissioning.
Our master electrician holds EVITP certification, which many utility and state charger programs require.
Talk about a siteHow we develop a site
- Site screen: traffic, parking layout and nearby chargers
- Site control: LOI and lease with the property owner
- Utility capacity: service requests and will-serve letters from Xcel Energy, Colorado Springs Utilities, Idaho Power and others
- Funding: state grants and utility rebates, prepared in-house
- Design and permitting: stamped electrical and civil plan sets
- Build and commission: switchgear, conduit, chargers, testing and network activation
Engineering, procurement and construction under one contract
Penta carries commercial power and fast-charging projects from the first layout to energization. You get one accountable team for design, equipment and the build, instead of juggling an engineer, a supplier and an electrician.
We hold master electrician licenses in five states and EVITP certification, and we work directly with utilities such as Idaho Power, Xcel Energy, Colorado Springs Utilities and many others.
Request an EPC proposalWhat's included
- E
- Site layout, load calculations, single-line diagrams, stamped drawings and utility service applications
- P
- Switchgear, transformers, chargers and long-lead equipment, ordered and tracked to site
- C
- Civil, trenching and conduit, electrical install, testing, inspection and energization
EPC for the projects we build
Fast-charging plazas
Utility service, switchgear, chargers and network activation on one schedule.
DCFC developmentCommercial power
New services, upgrades and distribution for owners and developers.
Commercial workBatteries and backup power
Commercial battery storage and generator tie-ins designed into the service.
Past workPast projects
Commercial and residential solar, battery storage, EV charging and commercial electrical work.
$15M+
Electrical and solar work completed, at Penta and before
980+
Jobs run through our scheduling system since 2022
55+ MW
Solar taken through PTO, at Penta and before
80+
Owners, developers, contractors and solar companies
$1.1M+
Signed contracts scheduled for installation
Solar projects led before Penta (55+ MW)
Before Penta, our founding master electrician led more than 55 MW of school, church, agricultural and commercial solar through PTO. This is personal experience, not Penta project history.
K-12 campus solar
Rooftop and carport systems for school districts.
Church and campus solar
Carport and roof systems for large church campuses.
Ranch and farm solar
Ground and roof systems for ranches and growers.
Commercial solar
Systems for commercial and industrial buildings.
A Meridian contractor licensed across the West
Penta Electric is a family-owned company headquartered in Meridian, Idaho. Since 2022 we’ve brought a family business’s accountability to commercial-scale work. We focus on commercial electrical, DC fast-charging development and EPC.
Office: 1120 S Rackham Way, Suite 300, Meridian, ID 83642.
Licenses and certifications
- Idaho
- EC 058443 · RCE 63363
- Colorado
- EC.0103162 · Denver LIC00254347
- Montana
- ELE-UCO-LIC-59033
- Oregon
- CLR56
- Master
- ID 057490 · CO ME.3001828 · UT 12923160-5502 · TX 578880 · MT
- Solar
- NABCEP PV Installation Professional
- EV
- EVITP 5.0
Coming soon In progress
Contractor licenses we are applying for as Penta expands.
- Southeast
- Georgia · North Carolina · South Carolina · Kentucky · Tennessee
- West
- Nevada · New Mexico · Wyoming
- Midwest
- Minnesota · Illinois · Ohio · Wisconsin
- Oregon
- CCB contractor registration renewal
Building EV fast-charging infrastructure nationwide
Penta develops, builds and operates DC fast-charging sites on retail properties across the country, starting with an active pipeline in Colorado, with site control, utility capacity and state grants lined up before construction. Detailed terms are shared under NDA.
Upcoming projects: Colorado portfolio
Nine DC fast-charging plazas on retail properties. Every site has a signed LOI and a utility letter.
9 of 9
Signed LOIs
9 of 9
Will-serve or intent-to-serve
3
Xcel Energy rebates reserved
3
Charge Ahead Colorado applications submitted, and DCFC Plazas applications in progress at all 9 sites
| Site | Utility | Site control | Utility letter | Grants and rebates |
|---|---|---|---|---|
| Northglenn, CO | Xcel Energy | LOI signed | Will-serve received | Xcel rebate reserved Charge Ahead applied DCFC Plazas in progress |
| Westminster, CO | Xcel Energy | LOI signed | Will-serve received New feeder Dec 2026 to Feb 2027 | Xcel rebate reserved Charge Ahead applied DCFC Plazas in progress |
| Littleton, CO | Xcel Energy | LOI signed | Will-serve received | Xcel rebate reserved Charge Ahead applied DCFC Plazas in progress |
| Longmont, CO | Longmont Power & Communications | LOI signed | Will-serve received | DCFC Plazas in progress |
| Colorado Springs, CO (Murray) | Colorado Springs Utilities | LOI signed | Intent to serve received | DCFC Plazas in progress |
| Colorado Springs, CO (North Circle) | Colorado Springs Utilities | LOI signed | Intent to serve received | DCFC Plazas in progress |
| Colorado Springs, CO (Centennial) | Colorado Springs Utilities | LOI signed | Intent to serve received | DCFC Plazas in progress |
| Colorado Springs, CO (Jet Wing) | Colorado Springs Utilities | LOI signed | Intent to serve received | DCFC Plazas in progress |
| Fountain, CO | Fountain Utilities | LOI signed | Intent to serve received | DCFC Plazas in progress |
What comes next
Markets beyond Colorado, at earlier stages.
| Market | Type | Stage |
|---|---|---|
| Decatur, GA | Flagship DCFC plaza at a shopping center | License agreement in final review |
| Boise and Garden City, ID | DCFC sites at shopping centers | Site screening |
| Sparks, NV · Wood Village, OR · Boise, ID · Texas | Retail DCFC portfolio | Early development |
Why Penta builds them
Penta develops each site from first look to energization. The development work, due diligence and de-risking happen in-house before investor capital goes into construction.
One team, start to finish
- We find the site, sign the LOI, secure utility service, prepare the incentive applications, design, build and commission.
- No developer fee stacked on a contractor markup, and no handoffs between companies where cost and schedule slip.
- We are the licensed contractor, so construction cost and schedule stay in-house.
De-risked before it is built
- Site control and written utility service letters come before construction money.
- Available power, upgrade cost and service timing are confirmed with the utility, which is where most charging projects stall.
- Grant and utility rebate applications are prepared in-house, and incentives are tracked site by site.
- Master electrician licenses in five states and growing fast, plus EVITP certification.
Built to be profitable
- Every site is modeled on its own before we commit to building it: charger count, utility rates, demand charges, maintenance and insurance.
- Grants and utility rebates are pursued at every site to lower the capital needed to build.
- Sites are chosen for traffic, dwell time and available power, so usage and revenue grow as EV adoption grows.
- We don't pick sites on our own data alone. Several independent third-party market research sources check each site against real utilization data from existing chargers within a 20-mile radius, to test whether it can be profitable before we commit.
Detailed projections and terms are shared only with qualified parties under NDA.
What we've built
Figures from our accounting and job records, November 2026.
$15M+
Electrical and solar work completed, at Penta and before
980+
Jobs run through our scheduling system since 2022
55+ MW
Solar taken through PTO, at Penta and before
80+
Owners, developers, contractors and solar companies
$1.1M+
Signed contracts scheduled for installation
650 kWdc / 500 kWac array
Parma, Idaho. Our largest single job at about $1.4M, funded in part by a USDA REAP grant and inspected in 2026.
176 kWdc ground mount
Monteview, Idaho. Ballasted ground-mount system producing since 2026.
1200 A casino service
Jackpot, Nevada. New 3-phase service, transfer switch and distribution, plus a 120.8 kWdc rooftop array, for a hotel and casino.
12+ solar companies
Installation partner for regional and national residential solar companies across Idaho, Utah and Oregon, plus home battery systems.
55+ MW before Penta
Our founding master electrician led school, church, ranch and commercial solar projects through PTO.
Built safely. Built to last. Built to pass.
Electrical work is only finished when it is safe, inspected and documented. That standard applies on every Penta site, from a panel change to a fast-charging plaza.
Everyone goes home the way they came
Our crews work under a licensed master electrician and OSHA 30-trained leadership. Safety planning starts before the first conduit is set.
On every site
- Hazard review before work starts
- Lockout/tagout on every circuit before work begins
- Arc-flash-rated PPE and NFPA 70E practices for energized work
- Clean, organized work areas and secured equipment
- Coordination with the utility before any service work
We care about the details.
The parts you can see tell you how the parts you can't see were built.
Clean, deliberate installs
Straight conduit runs, dressed conductors, torqued terminations and labels on every panel, disconnect and conduit.
Planned for inspection
Every job is built to code and planned to pass inspection the first time, not fixed afterward.
Tested before turn-on
Torque, polarity and insulation resistance are tested before equipment is energized and commissioned.
Clear communication
One point of contact, honest schedules and no surprises from utility coordination to energization.
The details, up close
You know exactly what you have
When we finish, owners get a closeout package they can hand to their maintenance team, their insurer or the next contractor.
Closeout package
- As-built drawings and single-line diagram
- Panel schedules and equipment labels
- Test and commissioning results
- Inspection sign-offs and permits
- Equipment warranties and manuals
- Completion photos
Build the power behind what's next.
We're growing across commercial electrical, DC fast charging and EPC. If you take pride in clean, safe work, we want to talk with you.
Electricians who care about the details
- Journeyman electricians
- Apprentice electricians
- Foremen and lead electricians
Why Penta
- Commercial, fast-charging and EPC work, not just service calls
- Work under licensed master electricians
- A growing, family-owned Idaho company
Send your name, license level and a few lines about your experience.
Start a project
Send us your project through the request form. It goes straight into our scheduling system, and the office follows up.
Open the request formPrefer to call? (208) 760-8600, Monday through Friday.
Bid invitations and plans: casey@pentaelectricinc.com
What to include
- Project address and type (commercial, charging, EPC)
- Plans or a single-line, if you have them
- Utility and service size, if known
- Bid due date